Simulation and growth of cadmium zinc telluride from small seeds by the travelling heater method
Date
2017-06-08
Authors
Roszmann, Jordan Douglas
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The semiconducting compounds CdTe and CdZnTe have important applications in high-energy radiation detectors and as substrates for infrared devices. The materials offer large band gaps, high resistivity, and excellent charge transport properties; however all of these properties rely on very precise control of the material composition. Growing bulk crystals by the travelling heater method (THM) offers excellent compositional control and fewer defects compared to gradient freezing, but it is also much slower and more expensive. A particular challenge is the current need to grow new crystals onto existing seeds of similar size and quality.
Simulations and experiments are used in this work to investigate the feasibility of growing these materials by THM without the use of large seed crystals. A new fixed-grid, multiphase finite element model was developed based on the level set method and used to calculate the mass transport regime and interface shapes inside the growth ampoule. The diffusivity of CdTe in liquid tellurium was measured through dissolution experiments, which also served to validate the model. Simulations of tapered THM growth find conditions similar to untapered growth with interface shapes that are sensitive to strong thermosolutal convection. Favourable growth conditions are achievable only if convection can be controlled.
In preliminary experiments, tapered GaSb crystals were successfully grown by THM and large CdTe grains were produced by gradient freezing. Beginning with this seed material, 25 mm diameter CdTe and CdZnTe crystals were grown on 10 mm diameter seeds, and 65 mm diameter CdTe on 25 mm seeds. Unseeded THM growth was also investigated, as well as ampoule rotation and a range of thermal conditions and ampoule surface coatings. Outward growth beyond one or two centimeters was achieved only at small diameters and included secondary grains and twin defects; however, limited outward growth of larger seeds and agreement between experimental and numerical results suggest that tapered growth may be achievable in the future. This would require active temperature control at the base of the crystal and reduction of convection through thermal design or by rotation of the ampoule or applied magnetic fields.
Description
Keywords
Cadmium Telluride, Cadmium Zinc Telluride, Travelling Heater Method, Compound Semiconductors, Crystal Growth, Solution Growth, Thermosolutal Convection, Finite Element Analysis, Computational Fluid Dynamics, Deal.II, Level Set Method, Gallium Antimonide, Zone Refining, Vertical Gradient Freezing, Stefan Problem, Cylindrical Coordinates, Natural Convection, Radiation Detectors, Bulk Crystal Growth, CZT, Diffusivity, Dissolution, Tellurium, Cadmium, Enrichment by Virtual Interface Elimination