UVicSpace

Application of impact resonance method for evaluation of the dynamic elastic properties of polypropylene fiber reinforced concrete

Show simple item record

dc.contributor.author El-Newihy, Adham
dc.date.accessioned 2017-08-10T15:29:29Z
dc.date.available 2017-08-10T15:29:29Z
dc.date.copyright 2017 en_US
dc.date.issued 2017-08-10
dc.identifier.uri https://dspace.library.uvic.ca//handle/1828/8417
dc.description.abstract For evaluation and quality control of concrete structures, the impact resonant frequency method is widely accepted for monitoring structure in-service properties and detecting structural damage. Common defects in concrete include consolidation problems during casting and development of micro-cracks during stages of hydration. Monitoring the dynamic characteristics of concrete plays an essential role in detecting real-time and early stages of deterioration. Ample research is focused on detecting large defects, however not much information is available on detection of minor defects of composites like fiber reinforced concrete. Change of elastic behavior when Polypropylene fibers are added as reinforcement is investigated. Destructive tests on structures in-service are not always feasible thus leaving non-destructive condition assessment as the only option. Amongst the various non-destructive tests available, vibrational tests provide a practical method to predict the dynamic moduli of structures (dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio). The objective of this research is to assess the dynamic elastic properties of Polypropylene Fiber Reinforced Concrete (PFRC) in correlation with induced cracks and common consolidation defects using a lab developed non-destructive testing method that relies on impulse excitation and stress wave propagation to measure changes in the resonant frequency when polypropylene fibers are added to concrete. In the experimental program, two fiber sizes, macro and micro, with various volume contents have been used for casting PFRC cylinders and prisms. Fundamental resonant frequencies were measured for all cylinders and prisms in the transverse and longitudinal directions. All measured frequencies are directly related to the low-strain dynamic modulus of elasticity. In addition, PFRC prisms were used to investigate the relationship between the dynamic modulus of elasticity and modulus of rigidity. Several batches of similar mixtures are used to investigate different parameters that affect the resonant frequency of concrete such as the water to cement ratio, curing condition and age. Results indicated a decrease in the resonant frequency and elastic properties with an increase of the fiber content or length. Micro fibers showed higher dynamic elastic moduli when compared to macro fibers of the same mixture under saturated curing conditions. Post-cracked PFRC cylinders and flexural fractured prisms retained some of the resonant frequency with macro fibers exhibiting better elastic recovery when cracked. en_US
dc.language English eng
dc.language.iso en en_US
dc.rights Available to the World Wide Web en_US
dc.subject Concrete en_US
dc.subject Polypropylene Fiber en_US
dc.subject Resonant Frequency Testing en_US
dc.subject Modulus of Elasticity en_US
dc.title Application of impact resonance method for evaluation of the dynamic elastic properties of polypropylene fiber reinforced concrete en_US
dc.type Thesis en_US
dc.contributor.supervisor Gupta, Rishi
dc.degree.department Department of Mechanical Engineering en_US
dc.degree.level Master of Applied Science M.A.Sc. en_US
dc.description.scholarlevel Graduate en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search UVicSpace


Browse

My Account

Statistics

Help