Separation of CO2 using ultra-thin multi-layer polymeric membranes for compartmentalized fiber optic sensor applications

Show simple item record

dc.contributor.author Davies, Benjamin
dc.date.accessioned 2014-03-20T22:37:45Z
dc.date.available 2014-03-20T22:37:45Z
dc.date.copyright 2014 en_US
dc.date.issued 2014-03-20
dc.identifier.uri http://hdl.handle.net/1828/5207
dc.description.abstract Carbon dioxide sequestration is one of many mitigation tools available to help reduce carbon dioxide emissions while other disposal/repurposing methods are being investigated. Geologic sequestration is the most stable option for long-term storage of carbon dioxide (CO2), with significant CO2 trapping occurring through mineralization within the first 20-50 years. A fiber optic based monitoring system has been proposed to provide real time concentrations of CO2 at various points throughout the geologic formation. The proposed sensor is sensitive to the refractive index (RI) of substances in direct contact with the sensing component. As RI is a measurement of light propagating through a bulk medium relative to light propagating through a vacuum, the extraction of the effects of any specific component of that medium to the RI remains very difficult. Therefore, a requirement for a selective barrier to be able to prevent confounding substances from being in contact with the sensor and specifically isolate CO2 is necessary. As such a method to evaluate the performance of the selective element of the sensor was investigated. Polybenzimidazole (PBI) and VTEC polyimide (PI) 1388 are high performance polymers with good selectivity for CO2 used in high temperature gas separations. These polymers were spin coated onto a glass substrate and cured to form ultra-thin (>10 μm) membranes for gas separation. At a range of pressures (0.14 –0.41 MPa) and a set temperature of 24.2±0.8 °C, intrinsic permeabilities to CO2 and nitrogen (N2) were investigated as they are the gases of highest prevalence in underground aquifers. Preliminary RI testing for proof of concept has yielded promising results when the sensor is exposed exclusively to CO2 or N2. However, the use of both PBI and VTEC PI in these trials resulted in CO2 selectivities of 0.72 to 0.87 and 0.33 to 0.63 respectively, for corresponding feed pressures of 0.14 to 0.41 MPa. This indicates that both of the polymers are more selective for N2 and should not be used in CO2 sensing applications as confounding gas permeants, specifically N2, will interfere with the sensing element. en_US
dc.language English eng
dc.language.iso en en_US
dc.subject Optode en_US
dc.subject Caulked Membrane en_US
dc.subject CO2 Sensing en_US
dc.subject CO2 Separation en_US
dc.subject CO2 Sequeatration Monitoring en_US
dc.subject CO2 Sequestration en_US
dc.subject Downhole Monitoring en_US
dc.subject Fiber Optic Sensor en_US
dc.subject Gas Separation en_US
dc.subject Gas Separation Theory en_US
dc.subject Long Period Fiber Grating (LPFG) en_US
dc.subject Long Period Grating (LPG) en_US
dc.subject Membrane en_US
dc.subject Polybenzimidazole (PBI) en_US
dc.subject Polymeric en_US
dc.subject VTEC polyimide (PI) 1388 en_US
dc.title Separation of CO2 using ultra-thin multi-layer polymeric membranes for compartmentalized fiber optic sensor applications en_US
dc.type Thesis en_US
dc.contributor.supervisor Wild, Peter Martin
dc.contributor.supervisor Fyles, Thomas M.
dc.degree.department Department of Mechanical Engineering en_US
dc.degree.level Master of Applied Science M.A.Sc. en_US
dc.rights.temp Available to the World Wide Web en_US
dc.description.scholarlevel Graduate en_US
dc.description.proquestcode 0428 en_US
dc.description.proquestcode 0495 en_US
dc.description.proquestcode 0542 en_US

Files in this item

The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record

Search UVicSpace


My Account