UVicSpace

Modelling, simulation, testing, and optimization of advanced hybrid vehicle powertrains

Show simple item record

dc.contributor.author Wishart, Jeffrey
dc.date.accessioned 2008-05-02T17:22:13Z
dc.date.available 2008-05-02T17:22:13Z
dc.date.copyright 2008 en_US
dc.date.issued 2008-05-02T17:22:13Z
dc.identifier.uri http://hdl.handle.net/1828/937
dc.description.abstract The internal combustion engine (ICE) vehicle has dominated the transportation market for nearly 100 years. Numerous concerns with continued use of fossil fuels arise, however, and these concerns have created an impetus to develop more efficient vehicles that release fewer emissions. There are several powertrain technologies that could supplant conventional ICEs as the dominant technology, most notably electric and hybrid powertrains. In order to achieve the levels of performance and cost of conventional powertrains, electric and hybrid powertrain designers must use design techniques and tools such as computer modelling, simulation and optimization. These tools facilitate development of a virtual prototype that allows the designer to rapidly see the effects of design modifications and precludes the need to manufacture multiple expensive physical prototypes. A comprehensive survey of the state of the art of commercialized hybrid vehicle powertrains is conducted, and the term multi-regime in ICE hybrid vehicle (ICEHV) modelling is introduced to describe designs that allow for multiple configurations and operating regimes. A dynamic mathematical model of a power-split architecture with two modes (or configurations) introduced by General Motors Corporation is developed and a steady-state version is programmed into the ADvanced VehIcle SimulatOR (ADVISOR) simulation software package. This ADVISOR model is applied to a commercial delivery vehicle, and the fuel consumption of the vehicle undergoing a variety of drive cycles is determined. The two-mode model is compared to the ADVISOR models for the Toyota Hybrid System (THS), parallel hybrid, and conventional powertrains in the same vehicle. The results show that for this vehicle type, the two-mode design achieves lower fuel consumption than the THS and conventional powertrains, and only slighter greater fuel consumption than the parallel hybrid design. There is also considerable potential for improvement in performance of the two-mode model through the development of an optimal power management strategy. In the medium- to long-term, the necessity for zero-emission vehicles may position fuel cell systems (FCSs) to be commercialized as on-board energy conversion devices. FCSs are currently inordinately expensive with power density and durability issues, among other design problems. Fuel cell hybrid vehicle (FCHV) designers must use the available design techniques intelligently to overcome the limitations and take advantage of the higher efficiency capabilities of the fuel cell. As the first step in creating a virtual prototype of a FCS, a semi-empirical model of the system is developed and further enhancements such as transient response modelling are proposed. An optimization of the operating parameters to maximize average net power and average exergetic efficiency is conducted, and the technique is applied to the FCS model for the prototype fuel cell hybrid scooter (FCHS). The optimizations demonstrate that significant improvements in performance can be achieved, and that optimizations with more design variables are warranted. Models of a conventional battery scooter (BS) and of the FCHS are developed in ADVISOR. Simulations are conducted which compare the performance of the two models. Subsequently, performance tests of the BS and FCHS are conducted using a chassis dynamometer. Despite problems with the prototype FCHS, the tests confirm the theoretical results: the FCHS model achieves higher performance in terms of acceleration and power, while the BS model operates more efficiently and requires less energy. This study provides better understanding on the emerging FCHV and ICEHV technologies; introduced new and improved models for FCHV and multi-regime hybrid powertrains; developed FCHV and ICEHV performance simulation and design optimization methods using the new computer models; explored the methods for validating the computer models using prototype BS and FCHS on a research dynamometer; identified areas of improvements of the new experiment methods; and formed the foundation for future research in related areas. en_US
dc.language English eng
dc.language.iso en en_US
dc.rights Available to the World Wide Web en_US
dc.subject Hybrid Vehicle en_US
dc.subject Fuel cell system en_US
dc.subject Dynamometer testing en_US
dc.subject Virtual prototyping en_US
dc.subject Optimization en_US
dc.subject.lcsh UVic Subject Index::Sciences and Engineering::Engineering::Mechanical engineering en_US
dc.title Modelling, simulation, testing, and optimization of advanced hybrid vehicle powertrains en_US
dc.type Thesis en_US
dc.contributor.supervisor Dong, Zuomin
dc.degree.department Dept. of Mechanical Engineering en_US
dc.degree.level Doctor of Philosophy Ph.D. en_US


Files in this item

The following license files are associated with this item:

This item appears in the following Collection(s)

Show simple item record

Search UVicSpace


Browse

My Account

Statistics

Help