Direction of arrival estimation technique for narrow-band signals based on spatial Discrete Fourier Transform
| dc.contributor.author | Zaeim, Ramin | |
| dc.contributor.supervisor | Agathoklis, Panajotis | |
| dc.date.accessioned | 2018-08-24T18:03:10Z | |
| dc.date.available | 2018-08-24T18:03:10Z | |
| dc.date.copyright | 2018 | en_US |
| dc.date.issued | 2018-08-24 | |
| dc.degree.department | Department of Electrical and Computer Engineering | |
| dc.degree.level | Master of Applied Science M.A.Sc. | en_US |
| dc.description.abstract | This work deals with the further development of a method for Direction of Arrival (DOA) estimation based on the Discrete Fourier Transform (DFT) of the sensor array output. In the existing DFT-based algorithm, relatively high SNR is considered, and it is assumed that a large number of sensors are available. In this study an overview of some of the most commonly used DOA estimation techniques will be presented. Then the performance of the DFT method will be analyzed and compared with the performance of existing techniques. Two main objectives will be studied, firstly the reduction of the number of sensors and secondly the performance of the DFT based technique in the presence of noise. Experimental simulations will be presented to illustrate that in absence of noise, the proposed method is very fast and using just one snapshot is sufficient to accurately estimate DOAs. Also, in presence of noise, the method is still relatively fast and using a small number of snapshots, it can accurately estimate DOAs. The above mentioned properties are the result of taking an average of the peaks of the DFTs, X_n (k), obtained from a sequence of N_s snapshots. With N_s sufficiently large, the average over N_s snapshots approaches expected value. Also, the conditions that should be satisfied to avoid overlapping of main-lobes, and thus loosing the DOA of some signals, in the DFT spectrum are examined. This study further analyzes the performance of the proposed method as well as two other commonly used algorithms, MUSIC and conventional beamformer. An extensive simulation was conducted and different features of the spatial DFT technique, such as accuracy, resolution, sensitivity to noise, effect of multiple snapshots and the number of sensors were evaluated and compared with those of existing techniques. The simulations indicate that in most aspects the proposed spatial DFT algorithm outperforms the other techniques. | en_US |
| dc.description.scholarlevel | Graduate | en_US |
| dc.identifier.uri | http://hdl.handle.net/1828/9948 | |
| dc.language | English | eng |
| dc.language.iso | en | en_US |
| dc.rights | Available to the World Wide Web | en_US |
| dc.subject | Direction of Arrival | en_US |
| dc.subject | spatial DFT | en_US |
| dc.subject | Discrete Fourier Transform | en_US |
| dc.subject | narrow-band signals | en_US |
| dc.subject | DOA estimation | en_US |
| dc.subject | Array Signal Processing | en_US |
| dc.subject | sensor array | en_US |
| dc.title | Direction of arrival estimation technique for narrow-band signals based on spatial Discrete Fourier Transform | en_US |
| dc.type | Thesis | en_US |