Design and manufacturing of composite structures using the resin transfer molding technique

dc.contributor.authorKeulen, Casey James
dc.contributor.supervisorSuleman, Afzal
dc.contributor.supervisorYildiz, Mehmet
dc.date.accessioned2007-12-22T22:30:36Z
dc.date.available2007-12-22T22:30:36Z
dc.date.copyright2007en_US
dc.date.issued2007-12-22T22:30:36Z
dc.degree.departmentDept. of Mechanical Engineeringen_US
dc.degree.levelMaster of Applied Science M.A.Sc.en_US
dc.description.abstractComposite materials have the potential to revolutionize life in the 21st century. They are contributing significantly to developments in aerospace, hydrogen fuel cells, electronics and space exploration today. While a number of composite material processing methods exist, resin transfer molding (RTM) has the potential of becoming the dominant low-cost process for the fabrication of large, high-performance products. RTM has many advantages over alternative processes, including the capability of producing complex 3D shapes with a good surface finish, the incorporation of cores and inserts, a tight control over fiber placement and resin volume fraction and the possibility of embedding sensors into manufactured components for structural health monitoring. Part of the reason RTM has not received widespread use is due to its drawbacks such as its relatively trial and error nature, race tracking, washout, high cycle time and void formation. The basic operation of the process involves loading a fiber reinforcement preform into a mold cavity, closing the mold, injecting resin into the mold and allowing the resin to cure. To study the resin transfer molding process and issues affecting it, a laboratory containing an experimental RTM apparatus has been established. The apparatus has a glass window to observe the mold filling process and can incorporate various mold shapes such as a quasi-2D panel, a 3-D rectangular section and a 3-D semicircular section. To characterize the flow through the molds a commercial CFD software has been used. This thesis describes the establishment of this laboratory and preliminary studies that have been conducted.en_US
dc.identifier.urihttp://hdl.handle.net/1828/294
dc.languageEnglisheng
dc.language.isoenen_US
dc.rightsAvailable to the World Wide Weben_US
dc.subjectComposite Materialsen_US
dc.subjectResin Transfer Moldingen_US
dc.subjectRTMen_US
dc.subject.lcshUVic Subject Index::Sciences and Engineering::Engineering::Mechanical engineeringen_US
dc.titleDesign and manufacturing of composite structures using the resin transfer molding techniqueen_US
dc.typeThesisen_US

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
thesis_final_no_copywright.pdf
Size:
47.5 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.19 KB
Format:
Item-specific license agreed upon to submission
Description: