Results of the 2018 ATLAS sTGC test beam and internal strip alignment of sTGC detectors
Date
2019-07-16
Authors
Carlson, Evan Michael
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Over the course of the next ten years, the LHC will undergo upgrades that will more than triple its current luminosity. This increase in luminosity will put greater demands on the ATLAS trigger system. To meet these demands, the Small Wheels of the muon spectrometer will be replaced with the New Small Wheels (NSWs) during Long Shutdown 2. The NSWs employ two gaseous detector technologies - small-strip Thin Gap Chambers (sTGCs) and Micromegas. To characterize the sTGCs, a series of test beams were conducted on a production sTGC module at the H8 beamline of CERN’s Super Proton Synchrotron. The setup and results of the test beams are presented, and it has been found that the detector meets the performance requirements of the NSW for efficiency and multiplicity at several operating voltages.
To meet the performance requirements of the NSW, the positions of the detector elements must be precisely known. Quality control measurements were made during construction of the sTGC strip cathode boards to allow for the reconstruction of individual strip positions. A transformation from the nominal strip geometry to the as-built geometry is derived based on the QC measurements. This transformation was tested against microscope and cosmic ray misalignment measurements. The as-built predictions agree well with the misalignment measurements, demonstrating the ability to reconstruct the strip positions from the QC measurements.
Description
Keywords
ATLAS, particle physics, physics, particle detectors, CERN, New Small Wheel, muon, sTGC, small-strip Thin Gap Chamber, beam test, quality control, alignment, as-built, cosmic ray, Large Hadron Collider, muon spectrometer, microscope, Long Shutdown 2, H8, Super Proton Synchrotron