Cellulose fiber as bacteria-carrier in mortar: Self-healing quantification using UPV

dc.contributor.authorSingh, Harshbab
dc.contributor.authorGupta, Rishi
dc.date.accessioned2020-07-13T14:10:54Z
dc.date.copyright2020en_US
dc.date.issued2020
dc.description.abstractCrack formation due to shrinkage or tensile forces is a major weakness of cementitious materials. To overcome this problem, in this study a self-healing mortar is produced using mineral producing alkaliphilic bacteria. Authors have used bacilius subtilis strain 168 type of bacteria to improve the ability of cementitious mortar to heal any formed cracks without any external intervention. Bacteria-based self-healing concrete/mortar needs bacteria-carriers to protect bacteria in a dense matrix to maintain the mineral-forming capacity of bacteria. However, the currently used bacteria-carriers are not always suitable for concrete because of their complex procedures or high cost. To develop a more suitable bacteria-carrier, in this paper feasibility of alkali treated micro cellulose fiber as a novel bacteria-carrier for self-healing mortar is investigated. Two types of bacterial mortar by using cellulose fiber as a bacteria-carrier were prepared. For one type, nutrients were added inside the mortar mix, while for the other, nutrients were added into the curing water. The crack healing efficiency of bacterial mortars was investigated using image analysis and ultrasonic pulse velocity (UPV) test and compared with unreinforced and control cellulose fiber mortars. Research shows that self-healing mortar using cellulose fiber as a bacteria-carrier result in maximum self-healing as compared to other mixes, 8.23% more than control samples, pre-cracked at 28 days with damaged degree between 0.1 to 0.2. At the dosage investigated, addition of cellulose fiber resulted in a decrease in compressive strength. It was observed that cellulose fiber increase the availability of bacteria in cracked region by acting as a bridge across the crack. Furthermore, cellulose fibers have a low cost and simplest method of immobilizing bacteria when compared with other bacteria carriers.en_US
dc.description.embargo2021-11-24
dc.description.reviewstatusRevieweden_US
dc.description.scholarlevelFacultyen_US
dc.description.sponsorshipDr. Francis Nano and Barb Currie from Biochemistry and Microbiological department of the University of Victoria are acknowledged for their help with the growth of bacteria. The technical expertise and in-kind support provided by Mark Ryan from Solomon Ultrafiber is greatly appreciated.en_US
dc.identifier.citationSingh, H., & Gupta R. (2020). Cellulose fiber as bacteria-carrier in mortar: Self-healing quantification using UPV. Journal of Building Engineering, 28, 1-14. https://doi.org/10.1016/j.jobe.2019.101090.en_US
dc.identifier.urihttps://doi.org/10.1016/j.jobe.2019.101090
dc.identifier.urihttp://hdl.handle.net/1828/11927
dc.language.isoenen_US
dc.publisherJournal of Building Engineeringen_US
dc.subjectself-healing mortar
dc.subjectbacteria-carrier
dc.subjectcellulose fibers
dc.subjectultrasonic pulse velocity
dc.subjectcracks
dc.subject.departmentDepartment of Civil Engineering
dc.titleCellulose fiber as bacteria-carrier in mortar: Self-healing quantification using UPVen_US
dc.typePostprinten_US

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Singh_Harshbab_JBuildEng_2020.pdf
Size:
1.98 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: