Chemometric analysis of full scan direct mass spectrometry data for the discrimination and source apportionment of atmospheric volatile organic compounds measured from a moving vehicle.
| dc.contributor.author | Richards, Larissa Christine | |
| dc.contributor.supervisor | Krogh, Erik | |
| dc.contributor.supervisor | Fyles, Tom | |
| dc.date.accessioned | 2021-08-30T22:35:09Z | |
| dc.date.copyright | 2021 | en_US |
| dc.date.issued | 2021-08-30 | |
| dc.degree.department | Department of Chemistry | |
| dc.degree.level | Doctor of Philosophy Ph.D. | en_US |
| dc.description.abstract | Anthropogenic emissions into the troposphere can impact air quality, leading to poorer health outcomes in the affected areas. Volatile organic compounds (VOCs) are a group of chemical compounds, including some which are toxic, that are precursors in the formation of ground-level ozone and secondary organic aerosols. VOCs have a variety of sources, and the distribution of atmospheric VOCs differs significantly over time and space. Historically, the large number of chemical species present at low concentrations (parts-per-trillion to parts-per-billion by volume) have made VOCs difficult to measure in ambient air. However, with improvements in analytical instrumentation, these measurements are becoming more common place. Direct mass spectrometry (MS), such as membrane introduction mass spectrometry (MIMS) and proton-transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) facilitate real-time, continuous measurements of VOCs in air, with full scan mass spectral data capturing changes in chemical composition with high temporal resolution. Operated on-road, mobilized direct MS has been used for quantitative mapping of VOCs at the neighborhood scale, but identifying VOC sources based on the observed mixture of molecules in the full scan MS dataset has yet to be explored. This dissertation describes the use of chemometric techniques to interrogate full scan MS data, and the progression from discriminating VOC samples of known chemical composition based on full scan MIMS data through to the apportionment of VOC sources measured continuously with a PTR-ToF-MS system operating in a moving vehicle. Lab‐constructed VOC samples of known chemical composition and concentration demonstrated the use of principal component analysis (PCA) to discriminate, and k-nearest neighbours to classify, samples based on normalized full scan MIMS data. Furthermore, multivariate curve resolution-alternating least squares (MCR-ALS) was used to resolve mixtures into molecular component contributions. PCA was also used to discriminate ‘real-world’ VOC mixtures (e.g., woodsmoke VOCs, headspace above aqueous hydrocarbon samples) of unknown chemical composition measured by MIMS. Using vehicle mounted MIMS and PTR-ToF-MS systems, full scan MS data of ambient atmospheric VOCs were collected and PCA was applied to the normalized full scan MS data. A supervised analysis performed PCA on samples collected near known VOC sources, while an unsupervised analysis using PCA followed by cluster analysis was used to identify groups in a continuous, time series PTR-ToF-MS dataset measured between Nanaimo and Crofton, British Columbia (BC). In both the supervised and unsupervised analysis, samples impacted by emissions from different sources (e.g., internal combustion engines, sawmills, composting facilities, pulp mills) were discriminated. With PCA, samples were discriminated based on differences in the observed full scan MS data, however real-world samples are often impacted by multiple VOC sources. MCR-weighted ALS (MCR-WALS) was applied to the continuous, time series PTR-ToF-MS data from three field campaigns on Vancouver Island, BC for source apportionment. Variable selection based on signal-to-noise ratios was used to reduce the mass list while retaining the observed m/z that capture changes in the mixture of VOCs measured, improving model results, and reducing computation time. Both point (e.g., anthropogenic hydrocarbon emissions, pulp mill emissions) and diffuse (e.g., VOCs from forest fire smoke) VOC sources were identified in the data, and were apportioned to determine their contributions to the measured samples. The data analyzed captured fine scale changes in the ambient VOCs present in the air, and geospatial maps of each individual source, and of the source apportionment were used to visualize the distribution of VOC sources across the sampling area. This work represents the first use of MCR-WALS to identify and apportion ambient VOC sources based on continuous PTR-ToF-MS data measured from a moving vehicle. The methods described can be applied to larger scale field campaigns for the source apportionment of VOCs across multiple days to capture diurnal and seasonal variations. Identifying spatial and temporal trends in the sources of VOCs at the regional scale can help to identify pollution ‘hot spots’ and inform evidence-based public policy for improving air quality. | en_US |
| dc.description.scholarlevel | Graduate | en_US |
| dc.identifier.bibliographicCitation | Richards, L. C.; Davey, N. G.; Fyles, T. M.; Gill, C. G.; Krogh, E. T. “Discrimination of Constructed Air Samples using Multivariate Analysis of Full Scan Membrane Introduction Mass Spectrometry (MIMS) Data” Rapid Commun Mass Spectrom, 32, 349-360 (2018). | en_US |
| dc.identifier.bibliographicCitation | Richards, L. C.; Davey, N. G.; Gill, C. G.; Krogh, E. T. “Discrimination and geo-spatial mapping of atmospheric VOC sources using full scan direct mass spectra data collected from a moving vehicle” Environ. Sci.: Process Impacts, 22, 173-186 (2020) | en_US |
| dc.identifier.uri | http://hdl.handle.net/1828/13333 | |
| dc.language | English | eng |
| dc.language.iso | en | en_US |
| dc.rights | Available to the World Wide Web | en_US |
| dc.subject | Chemometrics | en_US |
| dc.subject | Membrane introduction mass spectrometry | en_US |
| dc.subject | Proton-transfer reaction time-of-flight mass spectrometry | en_US |
| dc.subject | Volatile organic compounds | en_US |
| dc.subject | Air quality | en_US |
| dc.subject | Principal component analysis | en_US |
| dc.subject | Multivariate curve resolution-weighted alternating least squares | en_US |
| dc.subject | Receptor modelling | en_US |
| dc.subject | Tropospheric chemistry | en_US |
| dc.subject | Geospatial mapping of VOC sources | en_US |
| dc.subject | Air quality | en_US |
| dc.subject | Mobile mass spectrometry | en_US |
| dc.subject | Real-time, continuous, VOC measurements | en_US |
| dc.subject | Direct mass spectrometry | en_US |
| dc.subject | Source apportionment | en_US |
| dc.subject | Source discrimination | en_US |
| dc.subject | Direct mass spectrometry | en_US |
| dc.subject | Environmental chemistry | en_US |
| dc.subject | Mobile lab | en_US |
| dc.subject | Mobile air quality measurements | en_US |
| dc.subject | Cluster analysis | en_US |
| dc.subject | Multivariate curve resolution | en_US |
| dc.title | Chemometric analysis of full scan direct mass spectrometry data for the discrimination and source apportionment of atmospheric volatile organic compounds measured from a moving vehicle. | en_US |
| dc.type | Thesis | en_US |